Hitachi Compute Blade 2000 User Manual page 1458

System event log
Timestamp Module Level
------------------- ------ ------- -----------------------------
yyyy-mm-dd hh:mm:ss PX
in H/W agent.
This appears only when 37XX 39FFFFFF (XX depends on the LPAR number) is output.
5. For RX-ERR RX-DRP RX-OVR and TX-ERR TX-DRP TX-OVR in output
results of netstat –i command, a value of the physical port are displayed.
6. Emulex 10 Gb NIC has multiple ports per controller. Set the same value of
SR-IOV to ports in the controller: Enable or Disable.
7. When LPAR manager mode is changed from expansion to standard, the
definition of virtual NIC numbers: 8 to 15 and VF NIC is forcibly initialized to
the not-assigned state.
8. When using path redundancy and VLAN, set the following values.
[When Emulex NIC firmware version is 4.6.x.x]
VLAN mode for LPAR
Item
ARP monitoring
MII monitoring
[When Emulex NIC firmware version is 10.2.x.x]
VLAN mode for LPAR
Item
ARP monitoring
MII monitoring
9. When using inter-LPAR communication with VF NIC, set "fail_over_mac=1" to
the bonding option. If not, the inter-LPAR communication may not be
availabale at switching bonding.
10. Inter-LPAR communication is not available between VF NIC and Shared NIC.
System event log
WARNING 007B D2 7400 32 37XX 34FFFFF An error was detected
manager
Undef, Untagged
Undef, Untagged
Tagged (only [All])
manager
Untagged
Untagged
Tagged (only [All])
1407
Message
fail_over_mac
fail_over_mac=1
fail_over_mac=1
fail_over_mac=0
fail_over_mac
fail_over_mac=1
fail_over_mac=1
(Recommended)
fail_over_mac=0
fail_over_mac=0