Hitachi Compute Blade 2000 User Manual page 799

Sender address setting
# Item
1 E-mail Notification
2 E-mail address
3 host name
4 comment
5 SMTP server
6 Port number
SMTP server authentication settings
# Item
1 SMTP
authentication
2 Account
3 Authentication
system
Description
Indicates whether the remote email notification function is
enabled or disabled.
Set as: Enabled or Disabled
The e-mail address from which the notification is sent.
This field can contain a maximum of 64 characters.
You can use alphanumeric characters and the following
symbols: tilde (˜), @, #, $, %, ^, hyphen (-), +, =,
underscore (_), period (.), [, ]
The host name of the machine.
The host name can be specified as a fully qualified
domain name (FQDN) containing no more than 64
characters.
A comment.
This field can contain a maximum of 32 alphanumeric
characters or symbols.
The SMTP server used by the remote email notification
function.
Specify an IP address or host name.
The host name can be specified as a fully qualified
domain name (FQDN) containing no more than 64
characters.
The port number of the SMTP server.
Set as: 1 to 65535
Description
Setting whether or not to execute the SMTP
authentication:
Set as: Enabled or Disabled
Account for SMTP authentication
This field can contain a maximum of 64 ASCII characters.
You can use alphanumeric characters and the following
symbols: tilde (˜), @, #, $, %, ^, hyphen (-), +, =,
underscore (_), period (.), [, ]
You can also specify a password using up to 64 ASCII
characters. Alphanumeric characters, blank " ", and other
symbols that can be displayed.
Make sure to specify the account and password when
enabling the SMTP authentication.
Set as:
PLAIN: binary data
LOGIN: binary data; interactive
CRAM-MD5: challenge and response
748
Edit
Yes
Yes
Yes
Yes
Yes
Edit
Yes
Yes