Hitachi Compute Blade 2000 User Manual page 1307

On the Date and Time screen, place the cursor on Time Zone and press

Enter to open the subscreen. Set your time zone and press Enter.
+------------------------------------------------------------------------------+
|+- Logical Partition(LPAR) Date and Time ---------------- LPAR SEL Time
|| # Name Sta Time Mode
|| 1 LPAR1 Dea Local-Time
|| 2 LPAR2 Dea Local-Time
On the Date and Time screen, place the cursor on LPAR SEL Time and

press Enter to open the subscreen. Select LPAR RTC and press Enter.
+------------------------------------------------------------------------------+
|+- Logical Partition(LPAR) Date and Time ---------------- LPAR SEL Time
|| # Name Sta Time Mode
|| 1 LPAR1 Dea Local-Time
|| 2 LPAR2 Dea Local-Time
|| 3
|| 4
|| 5 +--------------------------------+
|| 6 |
|| 7 |
|| 8 | LPAR RTC
|| 9 | LPAR SEL Time
|| 10 | Last Activated
|+---------------------| Last Deactivated
| | RTC Last Modified
|+- System Date and Tim+--------------------------------+---------------------+|
|| Date and Time yyy| Display LPAR RTC
|+-Setting-------------+--------------------------------+---------------------+|
|| Import Config None
|| TimeSync Disable
|+----------------------------------------------------------------------------+|
|
+------------------------------------------------------------------------------+
| F6:Change System Date and Time F7:Change System Time Zone
+------------------------------------------------------------------------------+
On the Date and Time screen, press F7: Change System Time Zone to

open the subscreen. Set your time zone and press Enter.
|+- System Date and Time -----------------------------------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+-Setting--------------------------------------------------------------------+|
|| Import Config None
|| TimeSync Disable
|+----------------------------------------------------------------------------+|
On the Date and Time screen, synchronize the LPAR time using Adjust

LPAR Time.
|+- System Date and Time -----------------------------------------------------+|
|| Date and Time yyyy/mm/dd hh:mm:ss Time Zone + 9:00
|+-Setting--------------------------------------------------------------------+|
|| Import Config None
|| TimeSync Disable
|+----------------------------------------------------------------------------+|
On the Menu screen, press F9:Save Configuration to save the

configuration.
|| +-----------------------------------------+
|+----------------| LP configuration is saved successfully |----------------+ |
| +-----------------------------------------+
Date and Time Time Zone
yyyy/mm/dd hh:mm:ss + 9:00
yyyy/mm/dd hh:mm:ss + 9:00
Date and Time Time Zone
yyyy/mm/dd hh:mm:ss + 9:00
yyyy/mm/dd hh:mm:ss + 9:00
Select Display Time |
|
|
|
|
|---------------------+|
|[PageDown]:Page Down |
|0
1256
-+|
||
||
||
-+|
||
||
||
||
||
||
||
||
||
||
||
Adjust LPAR Time ||
||
||
|
Esc:Menu |
Adjust LPAR Time ||
||
||
Adjust LPAR Time ||
||
||
| |
|