Hitachi Compute Blade 2000 User Manual page 1209

The following table describes all of the items displayed in the LPAR manager Menu
screen.
# Title
(1) Menu
(2) Tips
(3) Comments
(4) LPAR manager identifier Displays ID to identify LPAR manager configured in the
(5) Error event detected
(6) System time
(7) LPAR manager firmware
version
Description
Displays the title of the screen that can be displayed by the
LPAR manager.
In addition, select the title of each screen using ([↑], [→],
[↓] or [←]),and press Enter. The display changes into the
selected screen.
Lists the function keys and the shortcut keys available in
this screen.
F3: Activates an LPAR.
F4: Deactivates an LPAR.
F5: Reactivates an LPAR.
F6: Adds an LPAR definition.
F7: Removes an LPAR definition.
F8: Switches from the LPAR manager screen to an LPAR
screen.
F9: Saves the LPAR manager configuration.
Alt+t: Refreshes the LPAR manager screen display.
Alt+r: Shutdown the LPAR manager system.
Note: F3, F5, F6, and F7 are not available on the LPAR
where LPAR migration has failed.
Displays a brief description of the selected item.
system configuration screen.
See System configuration for the details of LPAR manager
identifier
Displays that LP system logs at the error level are detected.
When this is displayed, check the contents of the LP system
log in the LP System Logs screen.
See LP system logs for checking LP system logs.
To delete this display, click the Esc button on this screen, or
open the system logs screen.
Displays the LPAR manager display time configured in the
Date and Time screen.
Not updated regularly. Updated when the screen is
operated, or the screen requires Refresh in the LPAR
manager.
Use this as an approximate time.
Displays the LPAR manager firmware version and the
LPAR manager firmware internal version.
1158