Hitachi Compute Blade 2000 User Manual page 1507

Message content Hardware Component BMC access error was recovered.
Level Information
Explanation A fault in accessing the physical BMC was removed.
What to do None.
Message content LPAR manager activates LPAR in auto activation process.
Level Information
Explanation LPAR was activated with Auto Activate.
What to do None.
Message content
Level Error
Explanation An LPAR manager fault (LPAR manager Assist fault) occurred.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message content LPAR manager Assist damage occurred. (due to H/W error)
Level Error
Explanation An LPAR manager fault (LPAR manager fault) resulting from a
hardware fault occurred.
What to do Contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message content LPAR Manager detected a failure of retrying the setting of
Level Error
Explanation Retry of the operation to configure TxRate failed.
What to do A network failure might have occurred. Check the status of the
network to which this device is connected. If you cannot find any
network problem, a device failure might have occurred.
Message content LPAR manager auto activation process is cancelled.
Level Information
Explanation The Auto Activate operation was cancelled.
What to do None.
Message content LPAR manager auto activation process is ended.
Level Information
Explanation The Auto Activate operation is complete.
What to do None.
LPAR manager Assist damage occurred.
TxRate configuration.
1456