If you enter the IP address of partition 7, the changed value is displayed. A warning
appears saying that the connection to the partition may be disconnected. A
confirmation message appears. Enter Y, and press Enter. The network setting is saved
on the partition. When the IP address of the partition is changed, the session
connected by specifying the former IP address is disconnected. To cancel the network
setting in the partition, enter N and press Enter or just press Enter to confirm the new
setting value.
(A,N,[Q]) : A (Enter)
Subnetmask : 0. 0. 0. 0
([Unchange]) : 255.255.254.0 (Enter)
Default gateway : 0. 0. 0. 0
([Unchange]) : (Enter)
<Partition0>
IP address : 0. 0. 0. 0
([Unchange]) : 192.168.1.1 (Enter)
<Partition1>
IP address : 0. 0. 0. 0
([Unchange]) : 192.168.1.2 (Enter)
<Partition2>
IP address : 0. 0. 0. 0
([Unchange]) : 192.168.1.3 (Enter)
<Partition3>
IP address : 0. 0. 0. 0
([Unchange]) : 192.168.1.4 (Enter)
<Partition4>
IP address : 0. 0. 0. 0
([Unchange]) : 192.168.1.5 (Enter)
<Partition5>
IP address : 0. 0. 0. 0
([Unchange]) : 192.168.1.6 (Enter)
<Partition6>
IP address : 0. 0. 0. 0
([Unchange]) : 192.168.1.7 (Enter)
<Partition7>
IP address : 0. 0. 0. 0
([Unchange]) : 192.168.1.8 (Enter)
548