Hitachi Compute Blade 2000 User Manual page 1416

LPAR manager environment using the virtual NIC and

Basic environment have different NIC type and MAC
address. Therefore, install the NIC driver at the first
migration. Also change the middleware settings to
identify MAC address.
If migrating between the Basic environment and LPAR
manager environment with NIC to which the fixed IP
address is set, the IP address remains set to the old
MAC address. As a result, resetting the IP address
causes the overlap error. Therefore, delete the IP
address before migration.
See "MAC Address for Virtual NIC" for the NIC MAC
address. For setting middleware, see the middleware
manual.
Change the setting of SAN security on the storage side

because the LPAR manager environment and Basic
environment WWPN/WWWNN are different. For
WWPN/WWNN for the shared FC, see "FC Shared
WWPN/WWNN". For the setting change of SAN
security, see the manual of your storage device.
When you install OS in the Basic environment, change

the resolution, and migrate to the LPAR manager
environment, the screen might not be displayed via the
remote console. Therefore, change the SVGA
resolution to 800x600; 256 colors in Basic environment
before migrating to the LPAR manager environment.
1365