Hitachi Compute Blade 2000 User Manual page 1246

Official
# Title
Name
(9) Selected PCI PCI Device
Device Information
Information
(10) Function Key Function Key Displays the function keys that can be used in this
(11) Error event Error event
detected detection
The following table describes each item on this screen.
# Title
Activated Deactivated
-
(1) #
-
(2) Name
-
(3) Sta
-
(4) PCI Device#
-
(5) Type
(6) Schd -
(7) Device
∆
Assignment
: can be changed -: cannot be changed
Description
Displays the information for the PCI device selected
with the cursor.
#: Displays the number that LPAR manager gives each
PCI device for identification purposes.
Vendor: Displays the vendor name (up to15
characters)
Device Name: The device name (up to 31 characters)
Slot#: Displays the slot number.
Bus#: Displays the bus number of the PCI configuration
space
Dev#: Displays the device number of the PCI
configuration space
Func#: Displays the function number of the PCI
configuration space.
screen.
F5: Switches USB device assignment.
F10: Updates the content of any changes to the
Scheduling Mode of a PCI device to LPAR manager.
(IPF version LPAR manager only)
F11: Scrolls the page to the left within the screen.
F12: Scrolls the page to the right within the screen.
LPAR manager firmware version 59-0X/79-0X or later
F6: Changes the USB Auto Attach settings. Shown
when USB Auto Allocation to LPAR is set to Disable on
the LP Options screen.
Displays that LP system logs at the error level are
detected.
When this is displayed, check the LP system log in the
LP System Logs screen.
See LP system logs for checking LP system logs.
To delete this display, press the Esc key with this
screen or open the system logs screen.
Guest status
Failure
- -
Display only
- -
Display only
- -
Display only
- -
Display only
- -
Display only
-

Cannot be changed when the LPAR
-

has been activated.
∆ can be changed with conditions
1195
Initial Value
(When LPAR is
added)
-
-
Remarks