Hitachi Compute Blade 2000 User Manual page 1503

The VF is already assigned the maximum assignable times to
Message content
Explanation A device failed to be connected or disconnected.
LPAR manager Aborts LPAR activation. Aborts connecting or disconnecting the
operation device.
What to do Re-assign the device to the target LPAR once more, and re-activate
the LPAR.
Updating LPAR manager firmware, Please try again after it is
Message content
Explanation LPAR manager shutdown or the F10 key cannot be executed because
LPAR manager firmware is updating.
LPAR manager Cancels the specified process.
operation
What to do Execute the process again when LPAR manager firmware update is
completed.
Message content Updating LPAR manager firmware, Please wait until it is finished.
Explanation LPAR manager shutdown is waiting for execution during updating
LPAR manager firmware.
LPAR manager Stops activating LPAR.
operation
What to do Wait for a while until LPAR manager firmware updating is completed.
Message content
Explanation No VLAN ID is set in the LPAR manager system. No information can
be displayed.
LPAR manager Aborts the specified process.
operation
What to do Verify the setting of the network segment identifier, which is specified
to display.
When a message other than the above is displayed, contact your reseller or maintenance
personnel.
LPARs.
finished.
VLAN ID is not set.
1452