Hitachi Compute Blade 2000 User Manual page 976

Type D in the Delete menu of the user directory and press Enter, and the file name list
in the user directory is displayed. You are required to select a file to delete. Type the
number to specify the file, and the confirmation message appears for deletion. At the
prompt, to delete the file, type Y and press Enter. To cancel the setting, type N after
the confirmation message and press Enter, or just press Enter.
(D,[Q]) : D (Enter)
-- File list --
<File0>
io-conf.backup
Select file (0,[Q=Quit]) : 0
Confirm? (Y,[N]) : Y
- <io-conf.backup> Deleting file was completed.
Hit enter key. (Enter)
 FW command
You can display the firmware version of an I/O module. Type FW at the prompt, and
press Enter.
5713RF0 NNNNN(0)IOEU> FW
<< FW - Update I/O module firmware. >>
-- I/O module firmware --
# Behavior Revision
- -------- --------------------------------
0 Active A0101-A-3138
1 Standby A0101-A-3138
-- Dictionary --
Revision : 00053
-- I/O module firmware menu –
U. Update firmware
Q. Quit.
(U, [Q]) :
Select a menu item from the following list to execute it.
Menu
U. Update firmware.
Q. Quit
(Enter)
(Enter)
(Enter)
Updates the dictionary.
Quits the FW command.
925
Description