Hitachi Compute Blade 2000 User Manual page 838

ID Level
17B6 WARNING On HA monitor (cluster <%s>), cluster manager is suspended
because other cluster managers exist.
Meaning: Multiple cluster managers exist on the HA monitor cluster %s.
Action: Correct the HA monitor setting to set a cluster manager to a cluster. Then, resume
the HA monitor from the cluster manager to confirm that this message is not output.
17B7 WARNING On HA monitor (cluster <%s>), there is a management module
whose cluster management is not enabled.
Meaning: management modules with the cluster management feature disabled exist on the
HA monitor cluster %s.
Action: Correct the HA monitor setting to enable the cluster management feature in all
management module.
17C0 Info The management module logged an event.
Meaning: An event was recorded on the management module.
Action: No particular action is required.
17C1 WARNING The management module logged a warning.
Meaning: A warning-level error has occurred on the management module.
Action: Contact your sales or service representative.
17C2 FAIL The management module logged an error.
Meaning: A failure-level error has occurred on the management module.
Action: Contact your sales or service representative.
17D0 Info On partition <%s1>, updating the server blade BMC F/W has started.
Meaning: The process of updating the server blade firmware has begun on the partition
indicated by %s1. The nature of the maintenance task may cause this message to be output
multiple times.
Action: Do not connect to or operate the indicated partition until the update process has
completed.
17D1 Info On partition <%s1>, updating the server blade BMC F/W has
completed.
Meaning: The process of updating the server blade firmware has completed on the partition
indicated by %s1. The nature of the maintenance task may cause this message to be output
multiple times.
Action: No particular action is required.
17D2 Info On partition <%s1>, updating the server blade F/W has started.
Meaning: The process of updating the server blade firmware has begun on the partition
indicated by %s1. The nature of the maintenance task may cause this message to be output
multiple times.
Action: Do not connect to or operate the indicated partition until the update process has
completed.
17D3 Info On partition <%s1>, updating the server blade F/W completed.
Meaning: The process of updating the server blade firmware has completed on the partition
indicated by %s1. The nature of the maintenance task may cause this message to be output
multiple times.
Action: No particular action is required.
17D4 Info Updating the management module F/W has started.
Meaning: The process of updating the management module firmware has begun. The nature
of the maintenance task may cause this message to be output multiple times.
Action: Do not connect to or operate the management module until the update process has
completed.
17D5 Info Updating the management module F/W completed.
Message
Description
787