Hitachi Compute Blade 2000 User Manual page 1251

Official
# Title
Name
(10) Function Key Function Key Displays the function keys that can be used in this
(11) Error event Error event
detected detection
# Title
Activated Deactivated
(1) #
(2) Name
(3) Sta
(4) #VNIC
(5) Device
(6) VNIC Number
(7) VNIC
Assignment
(8) PageUP/
PageDown
keys
(9) VNIC Information for Shared NIC/Virtual NIC
MAC
Address
Tag
Prm
VLANID
Inter-LPAR
Packet
Filtering
Description
screen.
F2: Displays the list of assigned VLAN ID.
F5: Used to set the promiscuous mode.
F6: Used to change MAC addresses.
F7: Used to set the VLAN mode.
For LPAR manager firmware 57-30 or later
versions:
F8 is used for setting Inter-LPAR Packet Filtering.
For LPAR manager firmware 59-7X/79-7X or later
versions
F9: Used to set transmission bandwidth limitation for VF
NIC.
Sets from 100 Mbps to 10000 Mbps by the 100 Mbps.
For LPAR manager firmware 58-71/78-71 or later in
LPAR manager expansion mode:
F11: Scrolls the screen to the left.
F12: Scrolls the screen to the right .
Displays that LP system logs at the error level are
detected.
When this is displayed, check the LP system log in the
LP System Logs screen.
See LP system logs for checking LP system logs.
To delete this display, press the Esc key with this
screen or open the system logs screen.
Guest status
Failure
- - -
- - -
- - -
- - -
- -

- - -
- -

- - -
-  -
-
 
  -
  -
-
 
1200
Initial Value
(When LPAR is
added)
-
-
Remarks
Display only
Display only
Display only
Display only
LPAR manager firmware version
59-0X/79-0X or later
Display only
Display only
LPAR manager firmware 57-30 or
later versions.