Hitachi Compute Blade 2000 User Manual page 649

LDAP : Enable
(0=Disable,1=Enable,[Unchange]) : 1
LDAP server 0 : esdadmin@hitachi.com
([Unchange]) : esdadmin@hitachi.com
LDAP server 1 : 192.168.1.200
([Unchange]) : 192.168.1.200
LDAP server 2 :
([Unchange]) :
Set port number to 636? (Y,[N]) : N
Port number : 636
(1-65535,[Unchange]) : 636
Set Bind DN to Anonymous? (Y,[N]) : N
Bind DN : bind
([Unchange]) : bind
Password : *****
([Unchange]) : (will not echo back.)
Retype password : (will not echo back.)
-- connection setting --
LDAP : Enable
LDAP server 0 : esdadmin@hitachi.com
LDAP server 1 : 192.168.1.200
LDAP server 2 :
Port number : 636
Bind DN : bind
Confirm? (Y,[N]) : Y
- Writing setting was completed.
Hit enter key.
Type S from the menu and press Enter to edit the directory search settings. After
setting it, the new setting and the confirmation message are displayed. To apply the
new directory search setting, enter Y and press Enter. To cancel settings, enter N or
just press Enter.
Base DN : testname
([Unchange]) : testname
Login ID attribute: loginid_attribute
([Unchange]) : loginid_attribute
Role attribute : role_attribute
([Unchange]) : role_attribute
-- directory search setting --
Base DN : testname
Login ID attribute : loginid_attribute
Role attribute : role_attribute
Confirm? (Y,[N]) : Y
- Writing setting was completed.
Hit enter key
598