Hitachi Compute Blade 2000 User Manual page 1456

Item
Wake On LAN (WOL)
LPAR User interface
manager
functions
LPAR migration
MAC address specified by a user
Middleware HCSM
SC/BSM
SC/DPM
Server installation and monitoring tool
(SIMT) log monitor
Linux high
reliability options
Notes:
1. When you need to execute Force Recovery, shutdown the OS on the LPAR to
be deactivated before the execution. If Force Recovery is executed while the
LPAR is running, VF NIC will be unavailable on the OS on the LPAR. To
recover VF NIC, reboot the OS on the LPAR after Force Recovery is
completed.
2. When a VF NIC device is isolated, the following message appears in
/var/log/messages. Immediately reboot the guest OS to which the VF NIC
device is assigned to release the isolation.
[/var/log/messages]
clocksource tsc unstable (delta = -8589944970 ns)
3. When a guest OS, to which VF NIC is assigned, is rebooted, the following
messages may appear in /var/log/messages and in the system event log if
SIMT log monitor is running. They do not affect the guest OS operation.
[/var/log/messages]
be2net 0000:XX:XX.X: Could not use PCIe error reporting
: Bus: Dev. Func
XX:XX.X
[System event log]
Timestamp Module Level
------------------- ------ ------- -----------------------------
yyyy-mm-dd hh:mm:ss PX
detected in H/W agent.
This appears only when 37XX 39FFFFFF (XX depends on the LPAR number) is output.
4. When a guest OS enables promiscuous mode to VF NIC, at tcpdump startup
for example, the following messages may appear in /var/log/messages and in
the system event log if SIMT log monitor is running. They do not affect the
Support specifications
PXE
Not supported.
LPAR manager
Supported.
screen
HvmSh Supported.
HVM Navigator Supported.
Shutdown Supported.
Concurrent
Not supported.
maintenance
Supported.
Not supported.
Not supported.
Not supported.
Supported.
Linux Tough
Supported.
Dump
HA Network Driver
Not supported.
for Linux
HA Logger Kit for
Supported.
Linux
System event log
Info 007B D2 7400 32 37XX 39FFFFFF
1405
Message
An error was