Hitachi Compute Blade 2000 User Manual page 941

Local time information on the I/O module is described in the table below.
Item Description of item
Date Local date
Time Local time
Time zone and DST information on the I/O module is described in the table below.
Item Description of item
Time zone -
DST Daylight Saving Time
(DST)
DST start When DST starts.
time
DST end When DST finishes.
time
Details of DST are described in the following list.
Item
Y The day in the month.
lastXXX The last day of a week in the month: XXX is 3 characters to show a day of a
week. (For example: Sun, Mon, Tue, etc.)
XXX>=Y The first XXX after the Y in the month: XXX is 3 characters to show a day of a
week. (For example: Sun, Mon, Tue, etc.)
XXX<=Y The last XXX before the Y in the month: XXX is 3 characters to show a day of
a week. (For example: Sun, Mon, Tue, etc.)
Time synchronization information by NTP is described in the table below.
Item Description of item
NTP Time synchronization
by NTP
Value Description of value
YYYY-MM- YYYY: AD year; MM: month; DD:day
DD
hh:mm:ss hh: hour; mm:minute; ss: second
Value Description of value
from –2:00 Time difference from Coordinated
to +14:00 Universal Time (UTC)
Enable The daylight saving time setting is
enabled.
Disable The daylight saving time setting is
disabled.
MMM The time to start DST
ZZZZZ
MMM: the first 3 characters of a
hh:mm
month (ex. Apr, Oct)
ZZZZZ: start date
(hh: hour; mm: minute)
------- DST is disabled.
MMM The time to finish DST
ZZZZZ
MMM: the first 3 characters of a
hh:mm
month (ex. Apr; April; Oct:
October)
ZZZZZ: end date
(hh: hour; mm: minute)
------- DST is disabled.
Description of value
Value Description of value
Enable The setting of time synchronization
by NTP enabled.
Disable The setting of time synchronization
by NTP disabled.
890