Hitachi Compute Blade 2000 User Manual page 1520

Message content LPAR manager has successfully imported Time Setting of SVP.
Level Information
Explanation SVP time setting has been successfully imported.
What to do None.
Message content LPAR manager has successfully retrieved Time Setting of SVP.
Level Information
Explanation SVP time setting has been successfully retrieved.
What to do None.
Message content LPAR manager has successfully synchronized RTC
Level Information
Explanation RTC has been synchronized with the NTP server.
What to do None.
Message content LPAR manager has successfully synchronized the time with
Level Information
Explanation RTC has been synchronized.
What to do None.
Message content LPAR manager Isolated physical memory (address) due to
Level Error
Explanation Physical memory was isolated due to uncorrectable error.
What to do If the same message happens multiple times, contact your reseller
or maintenance personnel.
Message content LPAR manager Loader detected load error and recovered.
Level Warning
Explanation Configuration information failed to be read; however, this error was
corrected.
What to do If this LP system log is obtained each time LPAR manager starts,
contact the reseller from which you purchased this equipment or
consult maintenance personnel.
Message content LPAR manager Loader detected flash memory access error
Level Warning
Explanation LPAR manager detected flash memory failure, automatically
recovered, tried to copy it to the flash memory but failed, and then
read the configuration files from the management module.
What to do If this log is collected at every LPAR manager boot, contact your
reseller or consult maintenance personnel.
with NTP server.
RTC.
uncorrectable error.
and load configuration from SVP.
1469