Hitachi Compute Blade 2000 User Manual page 1360

Image of a shared NIC switch

The following example is for 17-port (1 port/LPAR + physical NIC) layer
2-switch function with16 LPARs and 1 shared NIC per LPAR.
Up to 16 pieces of this switch can be mounted depending on the number of
physical NICs with shared setting.
Ports 1 – 16 are configured by the shared NICs and Port17 by the physical NIC
port.
Guest OS Connection Port (Shared NIC: 1a)
ゲスト OS接続Por t ( 仮想NI C)
1 2 3 4 5 6
LPAR1
External LAN Connection Port (Physical NIC)
外部LAN接続Por t ( 物理NI C)
Setting Targeted
Item Port
Port Port1 - Assign to LPAR on the Virtual NIC (VNIC) Assignment screen.
connection Port16
Port17 Connect to physical cables.
* With the onboard NIC, no cable is required.
Port Speed Port1 - Auto Negotiation (This setting cannot be changed.)
Port16
- Supports 1000BASE-TX.
Port17 Auto Negotiation (This setting cannot be changed.)
- Supports 10/100/1000/10000BASE-TX\
VLAN mode Port1 - [VLAN mode] (if the version of Emulex NIC firmware is 4.6.x.x)]
and VLAN ID Port16
- Undef (Default)
- Tagged
- Untagged
* Only 1 VLAN mode can be set per LPAR.
[VLAN mode (if the version of Emulex NIC firmware is 10.2.x.x)
- Tagged (default)
- Untagged
* Only 1 VLAN mode can be set per port
[VLAN ID]
- Tagged : Up to 16 VLAN IDs out of the range from 1 to 4094, or
Assign all (ID).
- Untagged : Only one (1) VLAN ID out of the range from 1 to 4094
Port17 Tagged All (This setting cannot be changed.)
* Configured to transmit all packets.
Promiscuous Port1 – - Restricted
mode Port 16 Receives only packets addressed to the LPAR (MAC).
- Through (default)
Receives all packets in the same network.
7 8 9 10 11 12 13 14 15 16
17
Settings
1309