Hitachi Compute Blade 2000 User Manual page 612

Hide thumbs Also See for Compute Blade 2000:

Table of Contents

 LFT command

You can set redundancy at the management LAN port. Enter LFT at the prompt, and

press Enter. (LFT: Link Fault Tolerance)

5713RF0 NNNNN(0)SVP> LFT (Enter)

<< LFT - Link Fault Tolerance setting. >>

-- Link Fault Tolerance setting --

Ext port Management module LFT

-------- ----------------- ------- ------- -----

-- Link Fault Tolerance setting menu --

Z. Edit management0 port setting.

O. Edit management1 port setting.

Select a menu item in the table below to execute the function.

Edit management 0 port

Edit management1 port

Items on the screen are described in the table below.

Management module

Down(s) Up(s)

Edit redundancy setting on MGMT0 port of the

management module.

Edit redundancy setting on MGMT1 port of the

management module.

Quits the LFT command.

External output port

MGMT-0: MGMT0 port; MTGMT-1: MGMT1 port; MNT:

Which management module has open ports:

Active or Standby

Redundancy function of the management LAN port:

Enable or Disable

How many seconds it takes to ascertain that the external

output port is linkdown: specify 1 to 3600 seconds.

How many seconds it takes to ascertain that the external

output port is linkup: specify 1 to 3600 seconds.

Chapters

Table of Contents