Hitachi Compute Blade 2000 User Manual page 1031

If you type I and press Enter, you can install the public key for the account. The file list
stored in the user directory is displayed. You are prompted to select a file from the list.
When you specify the number of a file, the public key algorithm, key length, and
fingerprint are displayed. To start installing the public key, type Y and press Enter. To
cancel the installation, type N after the confirmation message and press Enter, or just
press Enter.
(I,U,[Q]) : I(Enter)
-- File list --
<File0>
id_dsa.pub
<File1>
id_rsa.pub
Select file (0-1,[Q=Quit]) :
-- Public key information --
<Public key0>
Algorithm : DSA
Key length : 1024
Fingerprint : 1f:90:2d:5e:16:a5:72:90:d8:b0:93:54:48:2b:2f:4e
Confirm? (Y,[N]) : Y (Enter)
- Installing public key was completed.
Hit enter key. (Enter)
Only OpenSSH public key file is supported.

Up to five public keys can be installed in one account.

RSA (the first-described public-key cryptosystem) and

digital signature algorithm (DSA) are supported. A public
key with SSH version 1 is not supported.
Check the fingerprint of the public key and confirm that

the fingerprint is identical to the fingerprint displayed
before installation.
Back up the public key beforehand by yourself.

If you type U in the account public key menu and press Enter, you can uninstall the
account public key. A message to confirm the uninstallation appears. To start
uninstalling the public key, type Y and press Enter. To cancel the installation, type N
after the confirmation message and press Enter, or just press Enter.
(I,U,[Q]) : U (Enter)
Confirm? (Y,[N]) : Y (Enter)
- Uninstalling public key was completed.
Hit enter key. (Enter)
0(Enter)
980