Hitachi Compute Blade 2000 User Manual page 1102

VNIC System No setting

Put the cursor on VNIC System No, and press Enter.
Input VNIC System No to set in the subscreen to VNIC System No Setting, and
press Enter.
+------------------------------------------------------------------------------+
|+- System Configuration -----------+-----------------------------------------+|
||
|| LP ID LP_192168020
||
|| LP IP Address 192.168.0.20
|| Subnet Mask 255.255.255.0
|| Default Gateway 0.0.0.0
||
|| BSM1 IP Address 192.168.0.168
|| BSM2 IP Address 0.0.0.0 +------------------------+
|| BSM3 IP Address 0.0.0.0 | VNIC System No Setting |
|| BSM4 IP Address 0.0.0.0 |
|| BSM1 Alert Port 20079
|| BSM2 Alert Port 20079
|| BSM3 Alert Port 20079
|| BSM4 Alert Port 20079
||
|| Management Path Default
|| VNIC System No: 0
|+----------------------------------+-----------------------------------------+|
|
+------------------------------------------------------------------------------+
| F10:Update System Config
+------------------------------------------------------------------------------+
VNIC System No is used to create the MAC address to avoid
creating the duplicate virtual NIC MAC address, the default
value. Specify a unique value to every LPAR manager system
including Compute Blade 1000, Compute Blade 2000, and
Compute Blade 320. See "(1) MAC Address for Virtual NIC"
for further details about MAC address for the virtual NIC.
|
| Alert Language
| Virtual Console Port 20801
|
|
|
|
|
|
| 1 |
+------------------------+
|
|
|
|
|
1051
||
Japanese ||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
|
Esc:Menu |