SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 63

DI01-28
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
24. Disconnect the air conditioner compressor connector and
remove the inlet and outlet pipes from the compressor.
Y220_01034
25. For the automatic transmission equipped vehicle, remove
the oil cooler pipes.
Y220_01035
Note
The oil cooler pipes are connected to cylinder block
at both sides and bottom area of oil with brackets.
Installation Notice
Pipe mounting bracket bolt
Pipe hose (radiator side)
Y220_01036
26. Set up the special to the cooling fan pulley and remove
the cooling fan assembly. To make the removal easier,
loosen the radiator shroud.
Installation Notice
Cooling fan pulley bolt
Y220_01038
union nut
10 ± 1.0 Nm
25 ± 2.5 Nm
25 ± 2.5 Nm
ENGINE ASSEMBLY
DI ENG SM - 2004.4