SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 78

C. Remove the belt tensioning device.
Notice
• To prevent the oil leaks, store the removed shock
absorber assembly with standing up.
• For air bleeding, pump the shock absorber around
3 times after installation.
• Be careful not to damage the rubber parts of the
shock absorber when removing.
• To prevent the oil leaks, remove the bolts from bottom
to top section. On the contrary, when installing,
tighten the bolts from top to bottom section.
7. Remove the power steering pump assembly.
A. Remove the power steering pump mounting bolts.
Installation Notice
Tightening torque
Notice
Be careful not to flow out the oil.
B. Remove the power steering pump assembly from the
engine.
Notice
To prevent the oil leaks, store the removed power
steering pump assembly with standing up.
8. Remove the air conditioner compressor assembly.
A. Unscrew the bolts and remove the air conditioner
compressor assembly.
Installation Notice
Tightening torque
ENGINE ASSEMBLY
DI ENG SM - 2004.4
25 ± 2.5 Nm
25 ± 2.5 Nm
DI01-43
Y220_01070
Y220_01071
Y220_01072
Y220_01073
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN