SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1675

Installation
1. Clean the tailgate outer panel.
• The gauze that has been used over 20 times should
be disposed.
• Fully dampen the gauze with a solution (isopropyl
alcohol).
• Do not contact your fingers to the cleaned glass
surface.
• Apply the adhesive primer around the fully dried glass.
• Make sure to thoroughly remove the foreign materials
such as oil and dirt from the adhesive primer applying
area.
2. Apply the glass primer.
• Store the glass primer in the refrigerator before using.
• Completely mix the primer before using (over 10
minutes, no deposit).
• Use the primer within 2 hours after opening the
package.
• Even though it is sealed again after opening, it should
be used within 24 hours.
• Distribute the primer evenly.
• Usable period after applied: 3 minutes to 8 hours
(reapply after 8 hours)
• When contaminated by the primer: Clean the
contaminants using a cloth with a cleaning solution
such as the mixed agent of ethyl alcohol and ethyl
acetate (50:50).
• Be careful not to flow down the primer. It may
contaminate the vehicle body.
3. Clean the tailgate glass.
• Keep the width of 15 mm from the windshield end to
cleaned area.
• The gauze that has been used over 20 times should
be disposed.
• Fully dampen the gauze with a solution (isopropyl
alcohol).
• Do not contact your fingers to the cleaned glass
surface.
• Apply the adhesive primer around the fully dried glass.
• Make sure to thoroughly remove the foreign materials
such as oil and dirt from the adhesive primer applying
area.
EXTERIOR
REXTON SM - 2004.4
Tailgate glass
Gauze
Priming
container
Tailgate outer panel glass
installation area
Turn table
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
11C-61
Section A-A
Plastic container
Solvent
(isopropyl
alcohol)
Y220_11C149
Section A-A
Section B-B
Section C-C
Y220_11C150
Y220_11C151