Rear Glass Run / Regulator / Channel - SSANGYONG 2004 Rexton 2.7XDi Workshop Manual

Rear Glass Run / Regulator / Channel

1. Remove the door trim, seal and glass.
2. Remove the door glass run from door.
Notice
Apply a small amount of soapy water to the contacting
point of glass run and the glass with a brush to make
the installation easier.
3. Remove the door regulator assembly.
1) Disconnect the window motor connector.
2) Unscrew the mounting nuts.
Installation Notice
Tightening torque
3) Remove the window regulator.
4. Remove the glass channel.
1) Remove the inner panel from rear door.
EXTERIOR
REXTON SM - 2004.4
8 Nm
11C-51
Y220_11C121
Y220_11C122
Y220_11C123
Y220_11C124
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN