SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1680

11C-66
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7. Install in the reverse order of removal.
1) Keep the glass panel closed (normal close position).
2) Check if the motor is at "Normal Close" position.
• Normal Close Position: The motor stop position
when turning off the system by the switch.
3) Install the motor.
The motor is engaged into the bolt hole in the locating
bracket.
4) Install the motor mounting bolts.
Installation Notice
Y220_11C166
5) Hook the relay box on the front beam.
6) Fasten the relay box with the tie-wrap.
7) Check the sun roof operations.
Y220_11C167
Tightening torque 3 Nm
EXTERIOR
REXTON SM - 2004.4