SSANGYONG 2004 Rexton 2.7XDi Workshop Manual page 1682

11C-68
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
Installation
1. Install the glass panel inside of cover-on panel (check
the bolt tightening locations from inside the vehicle)
NOTICE
Make sure the marking on the glass faces rearward.
Y220_11C171
2. Temporarily tighten the mounting bolts.
3. Slowly close the sun roof by using the sun roof switch.
The sun roof should be operated smoothly.
Y220_11C172
4. Adjust the sun roof height. The front level of the glass
should be same with the vehicle body and the rear level
of it should be higher 1 mm than the vehicle body. Tighten
the bolts.
Tightening torque
5. Check the operations of sun roof.
Y220_11C173
6. Tilt the glass by using the sun roof switch.
7. Install the side covers at both sides.
Check the installations of side inner cover and the side
outer cover. Check the abnormal noise and functions
while operating the sun roof.
Y220_11C174
5 Nm
EXTERIOR
REXTON SM - 2004.4