Neighbor Local-As; Neighbor Maximum-Prefix - Dell Force10 S4810P Reference Manual

Usage This feature advertises to BGP neighbors through a capability advertisement. In Receiver Only
Information mode, BGP saves the advertised routes of peers that support this capability when they restart.

neighbor local-as

Configure Internal BGP (IBGP) routers to accept external routes from neighbors with a local AS number in the AS
number path.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax neighbor {ip-address | peer-group-name} local-as as-number [no-
prepend]
To return to the default value, use the no neighbor {ip-address | peer-group-
name} local-as command.
Parameters
ip-address
peer-group-name
as-number
no prepend
Defaults Not configured.
Command Modes ROUTER BGP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Related bgp four-octet-as-support
Commands

neighbor maximum-prefix

Control the number of network prefixes received.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax neighbor {ip-address | peer-group-name} maximum-prefix maximum
[threshold] [warning-only]
To return to the default values, use the no neighbor {ip-address | peer-group-
name} maximum-prefix maximum command.
Enter the IP address of the neighbor in dotted decimal format.
Enter the name of the peer group to set the advertisement interval for
all routers in the peer group.
Enter the AS number to reset all neighbors belonging to that AS. The
range is 0 to 65535 (2-byte), 1 to 4294967295 (4-byte) or 0.1 to
65535.65535 (dotted format).
Specifies that local AS values do not prepend to announcements from
the neighbor.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
– enables 4-byte support for the BGP process.
389