Upgrade System Stack-Unit - Dell S4810 Reference Manual

upgrade system stack-unit

Copy the boot image or Dell Networking OS from the management unit to one or more stack members.
S4810
Syntax
upgrade {boot | system} stack-unit {all | 0-11 | A | B}
Parameters
boot
system
stack-unit
all
0-11
A
B
Defaults none
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.7.0
Version 8.3.11.1
Version 7.7.1.0
Usage To reboot using the new image, use the upgrade boot system stack-unit
Information
command.
Related
•
Commands
•
•
Stacking
Enter the keyword boot to copy the boot image from the
management unit to the designated stack members.
Enter the keyword system to copy the Dell Networking OS
image from the management unit to the designated stack
members.
Enter the stack-unit number. For the S4810, the range is
from 0 to 5.
Enter the keyword all to copy the designated image to all
stack members.
Enter the unit ID of the stack member to which to copy the
designated image.
Enter the keyword A to upgrade all stacked units in System A
(S4810 only).
Enter the keyword B to upgrade all stacked units in System B
(S4810 only).
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the S-Series.
reload — reboots Dell Networking OS.
reset stack-unit — resets the designated stack member.
show system (S-Series and Z-Series)
or a specific member.
— displays the status of all stack members
1615