Show Ipv6 Hosts - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

IPv6 Commands

show ipv6 hosts

Displays IPv6 Local Hosts Table.
show ipv6 hosts [substring]
Syntax Definitions
substring
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you do not specify a substring, all IPv6 hosts are displayed.
Examples
-> show ipv6 hosts
Name
-------------------------------------------+--------------------------------------
ipv6-test1.alcatel-lucent.com
ipv6-test2.alcatel-lucent.com
otheripv6hostname
output definitions
Name
IPv6 Address
Release History
Release 6.6.1; command was introduced.
Related Commands
ipv6 host
MIB Objects
alaIPv6HostTable
alaIPv6HostName
alaIPv6HostAddress
OmniSwitch 6250 CLI Reference Guide
Limits the display to host names starting with the specified substring.
IPv6 Address
4143:1295:9490:9303:00d0:6a63:5430:9031
Name associated with the IPv6 address.
IPv6 address associated with the host name.
Configures a static host name to the IPv6 address mapping to the
local host table.
November 2009
4235::1200:0010
4235::1200:0020
page 30-25