Show Qos Dcb-Output; Show Qos Priority-Groups - Dell S4810 Reference Manual

Pkts, 0 Error Traffic Class
TLV
Pkts

show qos dcb-output

Displays the ETS configuration in a DCB output policy.
S4810
Syntax
show qos dcb-output [ets-profile]
Parameters
[ets-profile]
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version
8.3.12.0
Version
8.3.16.0
Usage
Information
Example
Dell# show qos dcb-output
(Summary)
dcb-output ets

show qos priority-groups

Displays the ETS priority groups configured on the switch, including the 802.1p priority classes and ID of
each group.
S4810
Syntax
show qos priority-groups
Data Center Bridging (DCB)
Enter the ETS profile.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
NOTE: Please note that Dell Networking does not recommended to use this
command as it has been deprecated in the current 9.4.(0.0) release. A warning
message appears when you try to run this command indicating that you have
to use the dcb-map commands in the future.
priority-group san qos-policy san
priority-group ipc qos-policy ipc
priority-group lan qos-policy lan
555