Dcb-Policy Buffer-Threshold Linecard All Backplane All; Show Qos Dcb-Buffer-Threshold - Dell Z9500 Reference Manual

thresholds for the buffer. This method of configuration enables you to effectively
manage and administer the behavior of lossless queues.
Example
dcb-policy buffer-threshold linecard all portset all backplane
all test

dcb-policy buffer-threshold linecard all backplane all

Assign the DCB buffer configuration on the backplane ports. This setting takes precedence over the
global buffer-threshold setting.
Syntax
[no] dcb-policy buffer-threshold linecard <0-2>|all [port-set
<0-3/all>] backplane all <dcb-policy-name>
Parameters
buffer-
threshold
linecard
backplane all
Defaults None.
Command GLOBAL CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
Usage
You can configure the DCB buffer configuration on the backplane ports.
Information

show qos dcb-buffer-threshold

Displays the DCB buffer threshold assigned to a QoS policy.
Syntax
show qos dcb buffer-threshold {name}
Data Center Bridging (DCB)
Configure the profile name for the DCB buffer threshold
Enter the keyword linecard unit identification.
Enter the keywords backplane all to assign DCB policy to the
backplane ports.
Description
Introduced on the Z9500.
611