Show Dcb; Show Interface Dcbx Detail - Dell PowerEdge M I/O Aggregator Reference Manual

show dcb

Displays the data center bridging status, the number of PFC-enabled ports, and the number of
PFC-enabled queues.
Syntax show dcb [stack-unit unit-number]
Parameters
unit number
Command Mode EXEC PRIVILEGE
Command
Version 8.3.17.0
History
Example Figure 7-4. show dcb Command Example
FTOS# show dcb
stack-unit 0 port-set 0
Usage Specify a stack-unit number on the Master switch in a stack.
Information

show interface dcbx detail

Displays the DCBX configuration on an interface.
Syntax show interface port-type slot/port dcbx detail
Parameters
port-type
slot/port
Command Mode
EXEC Privilege
Command
Version 8.3.17.0
History
Enter the DCB unit number.
The valid values are 0 to 5.
Supported on M I/O Aggregator
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
PFC Queue Count : 2 (current), 2 (configured)
Enter the port type.
Enter the slot/port number.
Supported on M I/O Aggregator
Data Center Bridging | 95