Show Ip Bgp Next-Hop - Dell Z9500 Command Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

show ip bgp next-hop

View all next hops (using learned routes only) with current reachability and flap status. This command

only displays one path, even if the next hop is reachable by multiple paths.

show ip bgp [vrf vrf-name] next-hop

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

The following describes the show ip bgp next-hop command shown in the

following example.

Time Elapsed

Border Gateway Protocol

EXEC Privilege

Introduced on the S6000–ON.

Added support for VRF.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Displays the next-hop IP address.

Displays the IP address and interface used to reach the next

Displays the number of BGP routes using this next hop.

Displays the cost associated with using this next hop.

Displays the number of times the next hop has flapped.

Displays the time elapsed since the next hop was learned. If

the route is down, this field displays time elapsed since the

route went down.