Show Ip Bgp Next-Hop - Dell Force10 S4810P Reference Manual

Ftos command line reference guide for the s4810 system ftos 9.1.(0.0)

Hide thumbs Also See for Force10 S4810P:

Table of Contents

show ip bgp next-hop

View all next hops (using learned routes only) with current reachability and flap status. This command only displays one

path, even if the next hop is reachable by multiple paths.

C-Series, E-Series, S-Series, Z-Series, S4810

show ip bgp next-hop

Command Modes

Command History

Version 8.3.11.1

Version 8.3.7.0

Version 7.8.1.0

Version 7.7.1.0

The following describes the show ip bgp next-hop command shown in the Example

Time Elapsed

FTOS>show ip bgp next-hop

70.70.24.0/24

– views the current BGP routing table.

EXEC Privilege

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Displays the next-hop IP address.

Displays the IP address and interface used to reach the next hop.

Displays the number of BGP routes using this next hop.

Displays the cost associated with using this next hop.

Displays the number of times the next hop has flapped.

Displays the time elapsed since the next hop was learned. If the

route is down, this field displays time elapsed since the route went

63.114.8.33 63.114.8.33, Gi 12/22

63.114.8.34 63.114.8.34, Gi 12/22

63.114.8.35 63.114.8.35, Gi 12/22

63.114.8.60 63.114.8.60, Gi 12/22

RefCount Cost Flaps Time