Bgp Always-Compare-Med; Bgp Asnotation - Dell Force10 S4810P Reference Manual

path-count
Defaults Disabled
Command Modes
Command History
Version 8.3.11.0
Version 8.3.8.0
Related neighbor add-path
Commands advertisements.

bgp always-compare-med

Allows you to enable comparison of the MULTI_EXIT_DISC (MED) attributes in the paths from different external ASs.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax bgp always-compare-med
To disable comparison of MED, enter no bgp always-compare-med.
Defaults Disabled (that is, the software only compares MEDs from neighbors within the same AS).
Command Modes ROUTER BGP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.7.1.0
Usage
Any update without a MED attribute is the least preferred route.
Information
If you enable this command, use the clear ip bgp * command to recompute the best
path.

bgp asnotation

Allows you to implement a method for AS number representation in the command line interface (CLI).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax bgp asnotation [asplain | asdot+ | asdot]
To disable a dot or dot+ representation and return to ASPLAIN, enter the no bgp
asnotation command.
Defaults asplain
354
Enter the number paths supported. The range is 2 to 64.
• ROUTER BGP
• ROUTER BGP-address-family
Introduced on the Z9000.
Introduced on the S4810.
– specifies that this neighbor/peer group can send/receive multiple path
Introduced on the Z9000.
Introduced on the S4810.
Introduced command.
Introduced on the C-Series.