Show Ip Dhcp Pool Configuration; Show Ip Dhcp Server Statistics - NETGEAR ProSafe GSM7248 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
Number of Ping Packets
Excluded Address

show ip dhcp pool configuration

This command displays pool configuration. If
displayed.
Format
Modes
Pool Name
Pool Type
Lease Time
DNS Servers
Default Routers
Following additional field is displayed for Dynamic pool type:
Network
Following additional fields are displayed for Manual pool type:
Client Name
Client Identifier
Hardware Address
Hardware Address Type
Host

show ip dhcp server statistics

This command displays DHCP server statistics.
Format
Modes
8-92
The maximum number of Ping Packets that will be sent to verify that
an ip address id not already assigned.
The ranges of IP addresses that a DHCP server should not assign to
DHCP clients.
all
show ip dhcp pool configuration {<name> | all}
Privileged EXEC
User EXEC
The name of the configured pool.
The pool type.
The lease expiration time of the IP Address assigned to the client.
The list of DNS servers available to the DHCP client
The list of the default routers available to the DHCP client
The network number and the mask for the DHCP address pool.
The name of a DHCP client.
The unique identifier of a DHCP client.
The hardware address of a DHCP client.
The protocol of the hardware platform.
The IP address and the mask for a manual binding to a DHCP client.
show ip dhcp server statistics
Privileged EXEC
User EXEC
202-10102-01, May 2005
is specified, configuration for all the pools is
Switching Commands