Macfilter Addsrc; Macfilter Addsrc All - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

4.4.6 macfilter addsrc

This command adds the interface to the source filter set for the MAC filter with the MAC
address of
<macaddr>
specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode
4.4.6.1 no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the MAC
address of
<macaddr>
specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode

4.4.7 macfilter addsrc all

This command adds all interfaces to the source filter set for the MAC filter with the MAC
address of
<macaddr>
byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
must identify a valid VLAN.
Format
Mode
4.4.7.1 no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the
MAC address of
parameter as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode
Port and System Setup Commands
and VLAN of
parameter must identify a valid VLAN.
macfilter addsrc <macaddr> <vlanid>
Interface Config
and VLAN of
parameter must identify a valid VLAN.
no macfilter addsrc <macaddr> <vlanid>
Interface Config
and . You must specify the
<vlanid>
macfilter addsrc {all | <macaddr> <vlanid>}
Global Config
and VLAN of
<macaddr>
parameter must identify a valid VLAN.
no macfilter addsrc {all | <macaddr> <vlanid>}
Global Config
v1.0, March 2006
. The
<vlanid> <macaddr>
. The
<vlanid> <macaddr>
. You must specify the
<vlanid>
parameter must be
parameter must be
parameter as a 6-
<macaddr>
parameter
<vlanid>
<macaddr>
4-17