Show Vlan Brief - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Configured
Tagging

show vlan brief

This command displays a list of all configured VLANs.
Format
Mode
VLAN ID
VLAN Name
VLAN Type
8-62
Exclude - This port is never a member of this VLAN. This is
equivalent to registration forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies to allow the port to be dynamically regis-
tered in this VLAN via GVRP. The port will not participate in this
VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Determines the configured degree of participation of this port in
this VLAN. The permissible values are:
Include - This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is
equivalent to registration forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies to allow the port to be dynamically regis-
tered in this VLAN via GVRP. The port will not participate in this
VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Select the tagging behavior for this port in this VLAN.
Tagged - specifies to transmit traffic for this VLAN as tagged
frames.
Untagged - specifies to transmit traffic for this VLAN as
untagged frames.
show vlan brief
Privileged EXEC and User EXEC
There is a VLAN Identifier (vlanid )associated with each VLAN.
The range of the VLAN ID is 1 to 4094.
A string associated with this VLAN as a convenience. It can be
up to 16 alphanumeric characters long, including blanks. The
default is blank. VLAN ID 1 always has a name of `Default`. This
field is optional.
Type of VLAN, which can be Default, (VLAN ID = 1), a static
(one that is configured and permanently defined), or a Dynamic
(one that is created by GVRP registration).
202-10009-01_060204
Switching Commands