Dot1X User; Dot1X Unauthenticated-Vlan - NETGEAR ProSafe GSM7224P User Manual

no dot1x timeout
This command sets the value, in seconds, of the timer used by the authenticator state
machine on this port to the default values. Depending on the token used, the corresponding
default values are set.
Format
no dot1x timeout {guest-vlan-period | reauth-period | quiet-period |
tx-period | supp-timeout | server-timeout}
Mode
Interface Config

dot1x unauthenticated-vlan

Use this command to configure the unauthenticated VLAN associated with that port. The
unauthenticated VLAN ID can be a valid VLAN ID from 0-Maximum supported VLAN ID
(4093 for 7000 series). The unauthenticated VLAN must be statically configured in the VLAN
database to be operational. By default, the unauthenticated VLAN is 0, i.e. invalid and not
operational.
Default
0
Format
dot1x unauthenticated-vlan <vlan id>
Mode
Interface Config
no dot1x unauthenticated-vlan
This command resets the unauthenticated-vlan associated with the port to its default value.
Format
no dot1x unauthenticated-vlan
Mode
Interface Config

dot1x user

This command adds the specified user to the list of users with access to the specified port or
all ports. The <user> parameter must be a configured user.
Format
dot1x user <user> {<unit/slot/port> | all}
Mode
Global Config
no dot1x user
This command removes the user from the list of users with access to the specified port or all
ports.
Format
no dot1x user <user> {<unit/slot/port> | all}
Mode
Global Config
ProSafe Managed Switch
Switching Commands
97