Activate The Basic Port-Based Vlan Mode And Assign Vlans - NETGEAR MS108EUP User Manual

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch
that functions in trunk mode automatically belongs to all VLANs on the switch
and tags the traffic that it processes.
- Advanced 802.1Q VLAN: In an advanced 802.1Q VLAN configuration, VLAN 1
is added to the switch and all ports are untagged members of VLAN 1. You can
tag ports, untag ports, exclude ports, add more VLANs, assign a different VLAN
to a port, manage port PVIDs, and manage a voice VLAN.
The following table provides an overview of VLAN features that are supported on the
switch.
Table 2. Supported VLAN modes for the MS108EUP
VLAN Feature Basic
Port-Based VLAN
Total number of 8
VLANs
Egress tagging No
Multiple VLANs on a No
single port
Voice VLAN No
Activate the Basic Port-Based VLAN mode
and assign VLANs
By default, all types of VLANs are disabled on the switch.
When you activate the Basic Port-Based VLAN mode, all VLANs are added to the switch,
and all ports are made members of VLAN 1. This is the default VLAN in the Basic
Port-Based VLAN mode.
In the Basic Port-Based VLAN mode, you can assign each port (other than the uplink
port) to a single VLAN only.
To activate the Basic Port-Based VLAN mode and assign VLANs:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
Use VLANS for Traffic
Segmentation
Advanced Basic
Port-Based VLAN 802.1Q VLAN
8 64
No Yes (trunk port only)
Yes Yes (trunk port only)
No No
34
Advanced
802.1Q VLAN
64
Yes
Yes
Yes
User Manual