Deleteport (Global Config) - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

addport
This command adds one port to the port-channel (LAG). The interface is a logical unit/slot/port
number or a group ID of a configured port-channel.
Note: Before adding a port to a port-channel, set the physical mode of the port. For more
information, see
Format
addport {<logical unit/slot/port>|<lag-group-id>}
Mode Interface Config
deleteport (Interface Config)
This command deletes the port from the port-channel (LAG). The interface is a logical unit/slot/
port number or a group ID of a configured port-channel.
Format
deleteport {<logical unit/slot/port>|<lag-group-id>}
Mode Interface Config

deleteport (Global Config)

This command deletes all configured ports from the port-channel (LAG). The interface is a logical
unit/slot/port number of a configured port-channel. To clear the port channels, see
channel" on page 6-27
Format
deleteport <logical unit/slot/port> all
Mode Global Config
Switching Commands
"speed" on page 3-7
.
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
"clear port-
3-91