Email Alerting And Mail Server Commands; Show Logging Traplogs; Logging Persistent; Logging Email - NETGEAR ProSafe GSM7224P User Manual

show logging traplogs

This command displays SNMP trap events and statistics.
Format
show logging traplogs
Mode
Privileged EXEC
Term Definition
Number of
The number of traps since the last boot.
Traps Since
Last Reset
Trap Log
The number of traps the system can retain.
Capacity
Number of
The number of new traps since the command was last executed.
Traps Since Log
Last Viewed
Log
The log number.
System Time Up
How long the system had been running at the time the trap was sent.
Trap
The text of the trap message.

logging persistent

Use this command to configure the Persistent logging for the switch. The severity level of
logging messages is specified at severity level. Possible values for severity level are
(emergency|0, alert|1, critical|2, error|3, warning|4, notice|5,
info|6, debug|7).
Default
Disable
Format
logging persistent <severity level>
Mode
Global Config
no logging persistent
Use this command to disable the persistent logging in the switch.
Format
no logging persistent
Mode
Global Config

Email Alerting and Mail Server Commands

logging email

This command enables email alerting and sets the lowest severity level for which log
messages are emailed. If you specify a severity level, log messages at or above this severity
ProSafe Managed Switch
Utility Commands
520