Toyota T100 1996 Service Manual page 1795

SR−88
1996 TOYOTA T100 (RM449U)
STEERING
5. INSTALL PITMAN ARM
(a) Align the alignment marks on the pitman arm and the
Alignment
Marks
cross shaft.
(b) Install the spring washer and pitman arm set nut.
Torque: 177 N·m (1,800 kgf·cm, 130 ft·lbf)
(c) Connect the pitman arm to the relay rod.
(d) Install the nut and a new cotter pin.
Torque: 90 N·m (920 kgf·cm, 67 ft·lbf)
6. INSTALL ENGINE UNDER COVER
R04469
Tighten the 4 bolts.
7. CHECK FRONT WHEEL ALIGNMENT
(See page SA−10)
− STEERING LINKAGE