Dell Force10 Z9000 Reference Manual page 1336

Command Modes EXEC
Command History
Version 8.3.11.1
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage This command displays the contents of the flash:/ADMIN_DIR/ssh/authorized-
Information keys.username file.
Example
FTOS#show ip ssh rsa-authentication my-authorized-keys
ssh-rsa
AAAAB3NzaC1yc2EAAAABIwAAAIEAyB17l4gFp4r2DRHIvMc1VZd0Sg5GQxRV1y1
X1JOMeO6Nd0WuYyzrQMM
4qJAoBwtneOXfLBcHF3V2hcMIqaZN+CRCnw/
zCMlnCf0+qVTd1oofsea5r09kS0xTp0CNfHXZ3NuGCq9Ov33m9+U9tMwhS8vy8A
VxdH4x4km3c3t5Jvc=
freedom@poclab4
FTOS#
Related ip ssh rsa-authentication (Config)
Commands
ssh
Open an SSH connection specifying the hostname, username, port number and version of the SSH client.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
ssh {hostname | ipv4 address | ipv6 address} [-c encryption
cipher | -l username | -m HMAC algorithm | -p port-number | -v
{1 | 2}]
Parameters
hostname
vrf instance
ipv4 address
ipv6-address
prefix-length
1336
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
NOTE: Some of the parameters in this command require licensing to access. For more
information, contact your Dell Force10 representative.
(OPTIONAL) Enter the IP address or the hostname of the remote
device.
(OPTIONAL) E-Series Only: Enter the keyword vrf followed by the
VRF Instance name to open a SSH connection to that instance.
(OPTIONAL) Enter the IP address in dotted decimal format A.B.C.D.
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format followed by
the prefix length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
– configures the RSA authorized keys.