Dell Force10 Z9000 Reference Manual page 1345

e-lmi
gmrp
gvrp
lldp
lacp
mmrp
mvrp
oam
stp
Defaults none
Command Modes CONF-IF-VLAN
Command History
Version 8.3.11.1
Version 8.5.1.1
Version 8.2.1.0
Version 7.4.1.0
Example
FTOS#conf
FTOS(conf)#interface vlan 2
FTOS(conf-if-vl-2)#vlan-stack compatible
FTOS(conf-if-vl-2)#member Gi1/2-3
FTOS(conf-if-vl-2)#protocol-tunnel stp
FTOS(conf-if-vl-2)#protocol-tunnel enable
Related show protocol-tunnel
Command
E-Series ExaScale only: Enter the keyword e-lmi to enable protocol
tunneling for the Ethernet local management interface (E-LMI).
E-Series ExaScale only: Enter the keyword gmrp to enable protocol
tunneling for the GARP multicast registration protocol (GMRP).
E-Series ExaScale only: Enter the keyword gvrp to enable protocol
tunneling for the GARP VLAN registration protocol (GVRP).
E-Series ExaScale only: Enter the keyword lldp to enable protocol
tunneling for the link layer discovery protocol (LLDP).
E-Series ExaScale only: Enter the keyword lacp to enable protocol
tunneling for the link aggregation control protocol (LACP).
E-Series ExaScale only: Enter the keyword mmrp to enable protocol
tunneling for the multiple MAC registration protocol (MMRP).
E-Series ExaScale only: Enter the keyword mvrp to enable protocol
tunneling for the Multiple VLAN Registration protocol (MVRP).
E-Series ExaScale only: Enter the keyword oam to enable protocol
tunneling for link-layer Ethernet operations, administration, and
maintenance functions (Ethernet in the First Mile - EFM - OAM
802.3ah).
Enter the keyword stp to enable protocol tunneling on a spanning
tree, including STP, MSTP, RSTP, and PVST.
Introduced on the Z9000.
Added support for 802.1X, E-LMI, GMRP, GVRP, LLDP, LACP,
MMRP, MVRP, and OAM 802.3ah protocol traffic to the E-Series
ExaScale.
Introduced on the C-Series, E-Series, and E-Series ExaScale.
Introduced
– displays tunneling information for all VLANs.
1345