Show Ip Route - Dell Z9500 Command Reference Manual

Version
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Example
Dell#show ip protocols
Routing Protocol is "bgp 1"
Dell#

show ip route

View information, including how they were learned, about the IP routes on the switch.
Z9500
Syntax
show ip route hostname | ip-address [mask] [longer-prefixes] |
list prefix-list | protocol [process-id | routing-tag] | all |
connected | static | summary]
Parameters
ip-address
mask
978
Description
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Regular evaluation optimization enabled/disabled added to
display output.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Cluster Id is set to 20.20.20.3
Router Id is set to 20.20.20.3
Fast-external-fallover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
Neighbor(s):
Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
(OPTIONAL) Specify a name of a device or the IP address of
the device to view more detailed information about the
route.
(OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
IPv4 Routing