Show Ipv6 Ospf Border-Routers - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show ipv6 ospf border-routers

show ipv6 ospf border-routers
Displays information regarding all or specified border routers.
show ipv6 ospf border-routers [area area_id] [router router_id]
Syntax Definitions
area_id
router_id
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command is used to display a list of border routers known by this OSPFv3 router.
•
By using the optional parameters, you can display the border routers using the specified parameter. For
example, to find a router using a router ID of 1.1.1.1, enter the command using the router ID of 1.1.1.1
as a search criteria.
•
See the Related Commands sections below to modify the list.
Examples
-> show ipv6 ospf border-routers
Router ID
----------------+---------------+--------+---------
6.6.6.6
6.6.6.6
fe80::2d0:95ff:fee2:6bda -> pseudo1
fe80::2d0:95ff:fee2:6bda -> pseudo2
output definitions
Router ID
Area
Metric
Type
page 18-28
A unique 32-bit value in IP address format.
A unique 32-bit value, such as an IP address, that identifies a neighbor-
ing router in the Autonomous System.
Area Metric
0.0.0.0 2
0.0.0.1 2
The unique identification for the router.
A unique 32-bit value, such as an IP address, that identifies a neighbor-
ing router in the Autonomous System.
The metric used by the routes.
The type of routes specified (intra or inter).
Type
INTRA
INTRA
OmniSwitch CLI Reference Guide
OSPFv3 Commands
March 2011