Ipv6 Ospf Interface Transit-Delay - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ipv6 ospf interface transit-delay

ipv6 ospf interface transit-delay
Configures the OSPFv3 interface transit time delay.
ipv6 ospf interface interface_name transit-delay delay
Syntax Definitions
interface_name
delay
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 10K
Usage Guidelines
The estimated number of seconds required to transmit a link state update over this interface. This
command takes into account transmission and propagation delays and must be greater than 0.
Examples
-> ipv6 ospf interface vlan-101 transit-delay 100
Release History
Release 7.1.1; command was introduced.
Related Commands
show ipv6 ospf interface
MIB Objects
ospfv3IfTable
ospfv3IfIndex
ospfv3IfTransitDelay
page 18-24
The name of the interface.
The transit delay, in seconds. The valid range is 0–3600.
default
1
Displays the status and statistics of an OSPFv3 interface.
OmniSwitch CLI Reference Guide
OSPFv3 Commands
March 2011