Ipv6 Ospf Admin-State - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

OSPFv3 Commands

ipv6 ospf admin-state

Enables or disables the OSPFv3 administrative status for the router.
ipv6 ospf admin-state {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
The OSPFv3 protocol should be enabled to route traffic.
Examples
-> ipv6 ospf admin-state enable
-> ipv6 ospf admin-state disable
Release History
Release 7.1.1; command was introduced.
Related Commands
show ipv6 ospf
MIB Objects
ospfv3GeneralGroup
ospfv3AdminStat
OmniSwitch CLI Reference Guide
Enables OSPFv3.
Disables OSPFv3.
default
enable
Displays OSPFv3 status and general configuration parameters.
March 2011
ipv6 ospf admin-state
page 18-3