Table 41: Show Ldp Neighbor Output Fields - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

Recovery Time: 0 msec
State: operational
LDP neighbor 10.0.2.2
Graceful Restart is enabled
Helper Mode is enabled
Reconnect Time: 220000 msec
Recovery Time: 0 msec
State: operational
To display information about LDP statistics for the session with each LDP neighbor:
host1#show ldp neighbor statistics
LDP Neighbor: 10.0.2.2
Message type
----------------
Initialization
Keepalive
Notification
Address
Address withdraw
Label mapping
Label request
Label withdraw
Label release
NOTE: The mpls keyword is optional and is provided for compatibility with non–E
Series implementations.
NOTE: If a password is configured for a peer, you can view the password with the
show configuration command. This command displays the passwords in cleartext
unless the service password-encryption command has been issued, in which case
the passwords are displayed in encrypted format.
Table 41 on page 333 lists the show ldp neighbor command output fields.
Meaning

Table 41: show ldp neighbor Output Fields

Field Name
LDP neighbor
LSR
Transport address
State
LDP advertisement
Received Sent
-------- ----
1 1
85 85
0 0
1 1
0 0
5 5
0 0
2 2
2 2
Field Description
IP address of LDP peer
IP address of remote and local peers; the number following the
colon is the platform label space ID, and is always 0
Transport remote and local address for the TCP session
State of the session, nonexistent (session connection not
established) or operational (has received keepalive message)
Mode of label distribution, downstream-unsolicited or
downstream-on-demand
Chapter 4: Monitoring MPLS
Monitoring LDP Neighbors
333